H3C Technologies H3C Intelligent Management Center User Manual
Page 414
392
c.
Double-click the icon of the target location view, or right-click the location view icon and
then select Open Topology from the shortcut menu. The topology of the location view
appears, displaying all the sub-location views, fit APs, and fat APs contained in the location
view.
Method 2
a.
From the navigation tree, select WLAN Manager > View Management > Location View. The
Location List displays all location views.
b.
Click the View Topology icon of the location view whose topology you want to view. The
topology of the location view appears, displaying all the sub-location views, fit APs, and fat
APs contained in the location view.
Perform the following operations on a sub-location view:
•
Click the icon of a location view. The tip window displays the following information about the
location view:
{
View Name—Name of the view.
{
View Status—Highest alarm level for the device in the view and its sub-views. If the view and
its sub-views contain no device or only unmanaged devices, this field displays Unmanaged.
•
Right-click the icon of a location view. The menu offers the following options:
{
Open Topology—Allows you to open the topology of the location view.
{
Delete—Allows you to delete the location view. Deleting a location view removes all its sub-
views, and also removes all the devices from these views but not from WSM.
{
Modify Label—Allows you to modify the label of the view.
{
Lock/Unlock—Allows you to lock/unlock the position of the location view on the topology. A
location view cannot be moved after being locked.
Perform the following operations on the fit AP:
•
Click the icon of a fit AP. The tip window displays the basic information about the fit AP,
including the device label, IP address, device status, and clients. For descriptions of these
parameters, see "
Viewing the device topology of an AC
•
Right-click the icon of a fit AP. The menu offers the following options:
{
View Physical Topology—Allows you to view the physical connections between the fit AP and
the AC. This option is available only when both the AC and fit AP are Comware-based
devices.
{
Device Information—Allows you to view the detailed information about the fit AP.
{
Modify AP—Allows you to modify the antenna type and angle for radios of the fit AP to
adjust its coverage area. For more information, see "
{
Delete Device from this Location—Allows you to delete the fit AP from the current location
view.
{
Lock/Unlock—Allows you to lock/unlock the position of the fit AP on the topology. A fit AP
cannot be moved after being locked.
Perform the following operations on the fat AP:
•
Click the icon of a fat AP. The tip window displays the basic information about the fat AP,
including the device label, IP address, device status, system name, vendor, and clients. For
descriptions of these parameters, see "
Viewing the wireless device topology
•
Right-click the icon of a fat AP. The menu offers the following options:
{
Device Information—Allows you to view the detailed information about the fat AP.