H3C Technologies H3C Intelligent Management Center - Manual (Page 262)

240
11 Managing MSM series fit APs
WSM enables administrators to manage MSM series fit APs through MSM series ACs.
After an AC is added to the IMC Platform, WSM obtains information about the fit APs managed by
the AC, and displays the fit APs on the Fit APs page. Operators can centrally manage the fit APs from
the Fit APs page, including querying the fit APs, viewing the fit APs details, and viewing and
modifying radio parameters for the fit APs.
You can check the fit AP names and serial numbers through the Compliance Center to make sure no
APs with the same serial number but different names, APs with the same name but different serial
numbers, or APs with the same name and serial number exist on different ACs. You can also verify the
VLANs configured on an AC to avoid VLAN configuration errors.
Viewing the fit AP list
The fit AP list displays information about all managed fit APs in IMC, including the online status,
device status, device label, serial number, IP address, MAC address, model, VLAN ID of fit APs, ACs,
and clients.
Operators can view information about MSM series fit APs on the Fit AP List page after setting the
Vendor criterion to HP.
To view the fit AP list:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
Fit AP List contents
{
Online Status—Online status of the fit AP. Options are Online and Offline.
{
Status—Current alarm status of the fit AP.
{
AP Label—Device label that identifies the fit AP in the IMC Platform. Click the device label of
a fit AP to view its details.
{
Serial Number—Serial number of the fit AP.
{
IP Address—IPv4 address of the fit AP.
{
MAC Address—MAC address of the fit AP.
{
Model—Model of the fit AP.
{
VLAN ID—VLAN ID corresponding to the service policy bound to the fit AP.
{
AC—AC that manages the fit AP. Click the AC label to view its details.
{
Total Clients—Number of clients that are associated with the fit AP. Click the number to view
all online clients.
{
Operation—Click the Operation icon for the fit AP to display the operation menu.
The operational tasks provided in the Operation menu are as follows:
− Modify AP Temple
− Ping