H3C Technologies H3C Intelligent Management Center - Manual (Page 159)

137
7 Managing Cisco access controllers
WSM enables you to manage Cisco ACs, including managing groups and WLANs, and configuring
radio parameters.
Before managing a Cisco AC, add the AC to the IMC Platform, configure SNMP parameters, and
synchronize the AC to IMC. After synchronization, the AC is automatically added to WSM and
displayed on the AC list.
Viewing the AC list
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List displays all ACs that have been added to IMC.
The parameters for a Cisco AC are the same as the parameters for an HP MSM series/HP
Comware-based AC. For more information, see "
Viewing the AC list ."
The Operation menu content for a Cisco AC is different from that for an HP MSM series/HP
Comware-based AC.
Synchronizing ACs
Synchronizing a Cisco AC is the same as synchronizing an HP MSM series/HP Comware-based AC.
For more information, see " Synchronizing ACs ."
Querying ACs
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
To query ACs:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List displays all ACs.
3. Perform a basic query:
a. Enter the device label (case-insensitive) or IP address of the AC. WSM supports fuzzy
matching for this field. For example, if you enter 19, all ACs with device labels or IP
addresses containing 19 are queried.
b. Click the Query icon . The Device List displays all ACs matching the query criteria.
c. Clear the Query field, and click the Query icon to display all ACs.
4. Perform an advanced query:
a. Enter or select one or more of the following query criteria in the Query area:
− Device Label—Enter a partial or complete device label (case-insensitive) of the AC.