Querying the monitoring clients – H3C Technologies H3C Intelligent Management Center User Manual
Page 566
544
To view the monitoring client list:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Locating Management.
The Locating Management page appears.
3.
In the Wireless Locating Based on iNode Sampling Points area, click the Monitoring Clients link.
The Monitoring Clients page appears, displaying all iNode clients used by concerned users.
Monitoring Clients list contents
{
MAC Address—MAC address of the iNode client.
{
Username—Name of the access user. The user name configured in IMC can be different
from the account name.
{
Account Name—Account name of the access user that uses the iNode client to access the
wireless network.
{
Location—Name of the location view containing the AP with which the iNode client is
associated.
{
Location Update Time—Last time when the iNode client reports the signal strength data of
sampling APs to WSM.
{
Sample—Set whether the client is a sampling client. Yes means the client is a sampling
client, and No means the client is not a sampling client.
{
Locate— Click the Locate icon
to locate the iNode client in the location view. For more
information, see "
If the Monitoring Clients list contains enough entries, the following navigational aids are displayed.
Navigating the Monitoring Clients list
•
Click the Next Page icon
to page forward in the Monitoring Clients list.
•
Click the Last Page icon
to page forward to the end of the Monitoring Clients list.
•
Click the Previous Page icon
to page backward in the Monitoring Clients list.
•
Click the First Page icon
to page backward to the front of the Monitoring Clients list.
Click 8, 15, 50, 100, or 200 at the upper right of the Monitoring Clients list to specify the number of
items you want to display on each page.
NOTE:
You can sort the Monitoring Clients list by every field except the Operation field. Click the column label
to sort the list by the selected field. The column label allows you to toggle between the various sort
options specific to each field.
Querying the monitoring clients
1.
Click the Service tab
2.
From the navigation tree, select WLAN Manager > Locating Management.
The Locating Management page appears.
3.
In the Wireless Locating Based on iNode Sampling Points area, click the Monitoring Clients link.
The Monitoring Clients page appears, displaying all iNode clients monitored.
4.
To query monitoring clients, enter or select one or more of the following query criteria: