Batch deleting groups – H3C Technologies H3C Intelligent Management Center User Manual
Page 175
153
The Configuration Management page appears.
3.
Click the Cisco tab.
4.
Click the Group Batch Configuration link.
The Batch Create Groups page appears. If you are not placed on this page, click the Batch
Create Groups link in the Configuration Management area.
5.
In the Basic Information area, enter a group name, a string of 1 to 63 characters.
You can place the cursor on the Tip icon
to view the allowed characters in a group name.
6.
In the Selected Devices area, select the ACs you want to configure.
{
All ACs—Select this option to create groups on all Cisco ACs.
{
Selected ACs—Select this option to create groups on the selected ACs.
a.
Select Selected ACs from the Selected Devices list.
b.
Click Add in the AC List area. A dialog box for selecting devices appears.
c.
Enter or select one or more of the following query criteria in the Query area:
−
Device Label—Enter the device label of the AC. WSM supports fuzzy matching for this
field.
−
IP Address—Enter a complete or partial IP address of the AC.
−
Model—Select the model of the AC. Options are models of all Cisco ACs on the AC List.
d.
Click Query. The Device List displays all ACs matching the query criteria. Click Reset to
clear the query criteria and display all ACs.
e.
Select one or multiple ACs in the Device List area and click OK.
The AC List displays the selected ACs.
f.
Click the Delete icon to delete the target AC.
7.
Click OK.
After the groups are created, the Result List page appears, displaying the operation result for
creating groups on each AC.
Result List
{
Device Label—Label of the AC.
{
IP Address—IP address of the AC.
{
Result—Operation result for creating groups. If the operation fails, WSM provides the cause
of failure. You can modify the configuration to create groups again.
8.
Click Back to go back to the Batch Create Groups page.
Batch deleting groups
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3.
Click the Cisco tab.
4.
Click the Group Batch Configuration link.
5.
Click the Batch Delete Groups link in the Configuration Management area.
6.
Enter a group name in the Basic Information area. If the group is not on the AC, the operation
to delete the group fails.
7.
In the Selected Devices area, select the ACs you want to delete.