H3C Technologies H3C Intelligent Management Center User Manual
Page 120
98
Port security mode
Key parameters
userlogin-secure-ext-or-
psk
•
Key negotiation type—Options are None and 11Key.
•
PSK type—Options are None, Pass-Phrase, and Raw-Key.
•
PSK—Enter the PSK value. If you select None for PSK type, this field
is not needed.
userlogin-withoui
No key parameters are needed.
{
Synchronize AC Configuration—Apply the port security mode setting to all ACs in the
specified AC group. To apply the port security mode setting only to the current AC, do not
select this option. This option is available only when the AC belongs to at least one AC
group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
7.
Click OK.
The Result List page appears, displaying the operation result for modifying the port security
mode for the selected WLAN logical interface and the result for AC synchronization.
8.
Click Back to return to the WLAN Logical Interface Configuration page.
Modifying the VLAN to which WLAN logical interfaces
belong
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3.
Click the Operation icon
for the target AC.
4.
Select
Wireless Logical Interface Configuration from the menu.
The Wireless Logical Interface Configuration page appears. All the WLAN logical interface
information of the AC is displayed on WLAN Logical Interface List.
5.
Click the Operation icon
for the WLAN logical interface you want to modify, and select
Modify VLAN from the menu..
Or
Select the WLAN logical interfaces for which you want to modify VLAN, and click Modify VLAN
on the WLAN Logical Interface List.
The Modify VLAN page appears.
6.
Set the following parameters as needed:
{
VLAN—Select a VLAN. Options are all VLANs created on the current AC.
{
Synchronize AC Configuration—Apply the VLAN setting to all ACs in the specified AC group.
To apply the VLAN setting only to the current AC, do not select this option. This option is
available only when the AC belongs to at least one AC group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
7.
Click OK.