H3C Technologies H3C Intelligent Management Center - Manual (Page 298)

276
Modifying parameters for an X-share antenna
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
The Fit AP List page displays all fit APs.
3. Click the device label for the target fit AP.
4. In the X-Share Antenna area, click the Modify icon for the target radio.
5. In the Modify X-Share Antenna dialog box, configure the following parameters:
{
Antenna ID—This parameter cannot be modified.
{
Attenuation—Enter an attenuation value.
{
Description—Enter a description for the antenna.
6. Click OK.
Managing engineered fit APs
An engineered fit AP is a fit AP that has been installed, but is in the debugging state. It cannot send
traps to IMC or provide wireless services for clients.
You can switch an engineered fit AP to a normal fit AP, and vice versa. You can switch engineered fit
APs to normal fit APs in batches.
Viewing the engineered fit AP list
The Engineered Fit AP List page displays information about all managed engineered APs in IMC,
including the engineered fit AP status, device label, serial number, IP address, MAC address, model,
and AC.
To view the engineered fit AP list:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > Fit APs.
3. The Fit AP List page displays all fit APs.
4. Click More and select Engineered Fit AP List.
The Engineered Fit AP List displays all engineered fit APs.
Engineered Fit AP List
{
Online Status—Online status of the engineered fit AP. Online and Online (Primary)
means the engineered fit AP is an online fit AP that connects to the primary AC. Online
(Secondary) means the engineered fit AP is an online fit AP that connects to the secondary
AC.
Offline means the engineered fit AP is offline.
{
AP Label—Device label that identifies the engineered fit AP in the IMC Platform. Click the
device label of a fit AP to view its details.
{
Serial Number—Serial number of the engineered fit AP.
{
IP Address—IPv4 address of the engineered fit AP.
{
MAC Address—MAC address of the engineered fit AP.