H3C Technologies H3C Intelligent Management Center - Manual (Page 112)

90
2. From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Radio Policy from the menu.
The Radio Policy Management page appears. All the radio policy information of the AC is
displayed on the Radio Policy List.
5. Click the Operation icon for the radio policy you want to view.
6. Select Bound Radios from the menu.
The Radio List dialog box appears.
The Bound Radio List displays information about all radios bound to the current radio policy.
Operators can unbind radios as needed and synchronize the most recent bound radio list to all
ACs in an AC group. For more information, see " Binding a radio policy to radios ."
Binding a radio policy to radios
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3. Click the Operation icon for the target AC.
4. Select Radio Policy from the menu.
The Radio Policy Management page appears. All the radio policy information of the AC is
displayed on the Radio Policy List.
5. Select the radio policy you want to bind.
6. Click Add in the Radio List area. The Select Radios dialog box appears.
7. Enter or select one or more of the following query criteria to search for the radios you want to
configure:
{
AP Label—Enter the label of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field.
{
AP Name—Enter the name of the fit AP to which the radio belongs. WSM supports fuzzy
matching for this field
{
Serial Number—Enter the serial number of the fit AP to which the radio belongs. WSM
supports fuzzy matching for this field
{
Radio Type—Select a radio type. Options are:
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn