H3C Technologies H3C Intelligent Management Center - Manual (Page 368)

346
Trap type Trap name Description
AP trap Radio Recovers The operational status of the radio on the AP is up.
AP trap Radio Channel Changed The radio channel on the AP changed.
AP trap Rogue Device Disappears The rogue device disappeared.
Security trap Detect Ad Hoc Device The AP detected a rogue Ad Hoc device.
Security trap Detect Rogue Device The AP detected a rogue AP.
Security trap Detect Weak IV Attack A wireless device is launching a weak IV attack.
Security trap Detect Flood Attack A wireless device is flooding the network.
Security trap Detect Rogue Wireless-bridge
A rogue device detected by the radio of the AP is
classified as a rogue wireless-bridge.
Security trap Detect Spoof Attack A wireless device is launching a spoofing attack.
Security trap Detect Unauthorized SSID The AP detected an unauthorized SSID.
Security trap
Client Interference
Disappears Interference caused by ambient clients on the channel
disappeared.
Security trap
Client Interferes With
Channel
The clients interfered with the channel.
Security trap
Other Device Interference
Disappears Interference caused by ambient devices on the channel
disappeared.
Security trap
Other Device Interferes With
Channel Interference caused by ambient devices on the channel
occurred.
Client trap
Wireless Client Association
Failure An association failure occurred on the client connected
to the radio of the AP.
Client trap
Wireless Client De-
association A deassociation occurred on the client connected to the
radio of the AP.
Client trap
Wireless Client
Authentication Error An authentication failure occurred on the client
connected to the radio of the AP.
Client trap
Wireless Client Authorization
Success
A client connected to the radio of the AP is authorized.
Client trap
Wireless Client Authorization
Failure A client connected to the radio of the AP failed to be
authorized.
Client trap Wireless Clients Full
The number of clients associated with the AP reached
one the following: the BSS's limit, the radio's limit, the
radio concurrent connections limit, the limit configured in
the radio policy, the AC's limit, the AC concurrent
connections limit, or the protocol limit.
Client trap Wireless Clients Full Recover
The number of clients associated with the AP recovered
to a value below one the following: the BSS's limit, the
radio's limit, the radio concurrent connections limit, the
limit configured in the radio policy, the AC's limit, the
AC concurrent connections limit, or the protocol limit.
Client trap
Client Station Deassociation
Success. A client connected to the radio of the AP disassociated
from the AP.
Client trap Wireless Client MIC Error
A MIC failure occurred on the wireless client connected
to the AP radio.