Querying mesh interfaces – H3C Technologies H3C Intelligent Management Center User Manual
Page 605
583
{
Operation—Click the Operation icon
for a mesh interface to bring up the operation
menu.
You can delete mesh interfaces, modify port security, modify VLAN, and modify mesh
profiles. For more information about these operations, see "
," "
Modifying the VLAN to which mesh interfaces belong
," "
."
5.
Click More, and select MP Policy Management or Mesh Profile Management to enter the
configuration page.
If the Mesh Interface List contains enough entries, the following navigational aids will be
displayed:
{
Click the Next Page icon
to page forward in the Mesh Interface List.
{
Click the Last Page icon
to page forward to the end of the Mesh Interface List.
{
Click the Previous Page icon
to page backward in the Mesh Interface List.
{
Click the First Page icon
to page backward to the front of the Mesh Interface List.
Click 8, 15, 50, 100, or 200 on the upper right of the Mesh Interface List to configure how
many items per page you want to display.
NOTE:
You can sort the Mesh Interface List by every field except the Operation field. Click the column
label to sort the list by the selected field. The column label allows you to toggle between various
sort options specific to each field.
6.
Click Related Operations, and then select Mesh Profile Management or MP Policy Management
from the menu to enter the corresponding page.
Querying mesh interfaces
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs or WLAN
Manager > Resource Management > Fat APs.
3.
Click the device label of an AC or fat AP to enter the device information page.
4.
On the Mesh Management menu on the lower right corner of the page, click Mesh Interface
Management.
The Mesh Interface Management page appears.
5.
Enter one or more of the following query criteria in the Query area:
{
Description—Description for the mesh interface. WSM supports fuzzy matching for this field.
{
Mesh Profile ID—ID of the mesh profile that is bound to the mesh interface. WSM supports
fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
6.
Click the Query icon .
The
Mesh Interface Management page displays all mesh interfaces
matching the query criteria.
7.
Clear the Query field, and click the Query icon
to display all mesh interfaces.