H3C Technologies H3C Intelligent Management Center - Manual (Page 387)

365
− AP Model—Enter the AP model.
− AP Name—Enter the AP name.
Click Add to add more AP matching rules. Click Delete to delete an AP matching rule.
6. Click OK.
Modifying a sub-location view
This function helps modify sub-location views on a location view. It cannot set the sub-location view
containing sub-location views to a hotspot.
To modify a sub-location view:
7. Click the Service tab.
8. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all locations.
9. Continue the procedure in one of the following ways:
{
Click the name of the target location view.
The Sub-location/Device List page appears.
{
On the Sub-location/Device List page, click the name of the target sub-location view.
The Sub-location/Device List page appears.
10. Click the Operation icon for the sub-location view you want to modify.
11. Select Modify from the menu.
The Modify Location page appears.
12. Set the sub-location view parameters as needed.
For more information, see "
Adding a sub-location view ."
13. Click OK.
Deleting a sub-location view
Deleting a sub-location view deletes all its sub-location views. The APs on the sub-location view and its
sub-location views are removed from the sub-location view, not from any other location view or the
WSM.
Deleting a sub-location view with which a hotspot is associated deletes the corresponding hotspot on
GIS view.
To delete a sub-location view:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List displays all location views.
3. Continue the procedure in one of the following ways:
{
Click the name of the target location view.
The Sub-location/Device List page appears.
{
On the Sub-location/Device List page, click the name of the target sub-location view.
The Sub-location/Device List page appears.