beautypg.com

H3C Technologies H3C Intelligent Management Center User Manual

Page 318

background image

296

{

AC—Device label of the AC of the client. Click the label link of an AC to view detailed

information about the AC. This parameter is not displayed when the client is connected to a
fat AP.

{

VLAN ID—Access VLAN ID of the client.

{

Power Save Mode—Indicates whether the power save mode is enabled for the client.

{

Up Time—Online duration of the client.

{

Location—Location view name of the access AP.

{

Channel—Working channel of the radio on the fit AP with which the client is associated.

Signal Quality

{

Reception Rate (Mbps)—Current reception rate of the client.

{

Transmission Rate (Mbps)—Current transmission rate of the client.

{

Received Noise—Current received noise of the client.

{

Signal Noise Ratio—Current signal noise ratio of the client.

{

Signal Strength (dBm)—Signal strength of client obtained by the access AP.

{

RSSI—RSSI value of the client signal.

Traffic Statistics

{

Reception (KB)—Total amount of traffic received by the client.

{

Transmission (KB)—Total amount of traffic transmitted by the client.

For the client that goes online through a Comware-based fat AP/fit AP, the following
information is displayed:
Basic Information

{

MAC Address—MAC address of the client.

{

Vendor—Vendor of the client. Unidentified vendors are displayed as Others.

{

Username—Username of the client. The username is displayed when 802.1X authentication
is enabled on the AC/fat AP. When WSM is collaborated with UAM or user information is

added to WSM, the username is displayed. Otherwise, this field is blank.

{

IP Address—The IP address is available when the client accesses the wireless network by
using iNode or when IP snooping is enabled on the access fat AP or AC. Otherwise,
0.0.0.0 is displayed.

{

SSID—SSID name used by the client to access the network.

{

Up Time—Online duration of the client.

{

Channel—Channel used by the client.

{

Radio Type—Radio type of the access AP. Options are:

802.11a

802.11b

802.11g

802.11bg

802.11at

802.11an

802.11gn

802.11ac