Deleting an x-share antenna, Saving an x-share antenna, Locating clients – H3C Technologies H3C Intelligent Management Center User Manual
Page 575: Locating a client
553
4.
Right-click on a blank area, and, from the shortcut menu, select X-Share Antenna Management.
5.
Right-click the X-Share antenna you want to modify, and, from the shortcut menu, select Modify.
6.
In the Modify X-Share Antenna dialog box, configure the following parameters:
{
Antenna ID—This parameter cannot be modified.
{
Attenuation—Enter the attenuation value.
{
Description—Enter the description for the antenna.
7.
Click OK.
8.
Drag the X-Share antenna icon to the correct place in the topology according to its actual
location.
Deleting an X-Share antenna
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3.
Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs, and fat
APs.
4.
Right-click on a blank area, and, from the shortcut menu, select X-Share Antenna Management.
5.
Right-click the X-Share antenna you want to delete, and, from the shortcut menu, select Delete.
A confirmation dialog box appears.
6.
Click OK.
Saving an X-Share antenna
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3.
Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs, and fat
APs.
4.
Right-click on a blank area, and, from the shortcut menu, select X-Share Antenna Management.
5.
Right-click on a blank area, and, from the shortcut menu, select Save.
Locating clients
You can locate one or more wireless clients. The locating results are displayed in the location view.
Locating a client
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3.
Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs, and fat
APs.