H3C Technologies H3C Intelligent Management Center - Manual (Page 178)

156
Batch modifying WLANs
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Cisco tab.
4. Click the WLAN Batch Configuration link.
Click the Batch Modify WLANs link in the Configuration Management area.
5. Enter the profile name and SSID for the WLAN to be modified. The SSID and profile name
cannot be modified and must match to avoid operation failures.
For more information about parameters, see "
Batch creating WLANs ."
Batch deleting WLANs
Deleting WLANs can disconnect clients from fit APs.
To batch delete WLANs:
1. Select the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Cisco tab.
4. Click the WLAN Batch Configuration link.
Click the Batch Delete WLANs link in the Configuration Management area.
5. Enter the profile name and SSID for the WLAN to be deleted in the Basic Information area. The
profile name and SSID must match to avoid operation failures.
6. In the Selected Devices area, select the ACs you want to delete.
{
All ACs—Select this option to delete the WLANs on all Cisco ACs.
{
Selected ACs—Select this option to delete the WLANs only on the selected ACs.
a. Select Selected ACs from the Selected Devices list.
b. In the AC List area, click Add. A window for selecting devices appears.
Enter or select one or more of the following query criteria to search for the ACs you want to
delete:
− Device Label—Enter the device label of the AC. WSM supports fuzzy matching for this
field.
− IP Address—Enter the IP address of the AC. WSM supports fuzzy matching for this field.
− Model—Select the model of the AC. Options are models of all Cisco ACs on the AC List.
c. Click Query. The Device List displays all ACs matching the query criteria. Click Reset to
clear the query criteria and display all ACs.
d. Select one or multiple ACs in the Device List area and click OK.
The AC List displays the selected ACs.
7. Click the Delete icon to delete the target AC.
8. Click OK.
The Result List page appears, displaying the operation result for deleting WLANs on each AC.
Result List