H3C Technologies H3C Intelligent Management Center User Manual
Page 410
388
The device topology of the AC appears, displaying the selected AC and all its managed fit APs.
Perform the following operation on the AC from the AC device topology:
•
Click the icon of the AC. The tip window displays the basic information about the AC, including
the device label, IP address, device status, Sysname, vendor, system uptime, online APs, and
associated wireless clients. For description about these parameters, see "
Perform the following operations on a fit AP from the AC device topology:
•
Click the icon of a fit AP. The tip window displays the following information about the fit AP:
{
Device Label—Device label that identifies the fit AP in WSM. Click the device label of a fit
AP to view its details.
{
IP Address—IP address of the fit AP obtained by the AC.
{
Device Status—State of the fit AP, Online or Offline.
{
Associated wireless Clients—Number of clients associated with the fit AP. Click the number to
view the list of all the online clients. For more information about the online client list, see
"
•
Right-click the icon of a fit AP. The menu contains the following options that can be applied to
the fit AP:
{
Device Information—Allows you to view the detailed information about the fit AP.
{
View Physical Topology—Allows you to view the physical connections between the fit AP and
the AC. This option is available only when both the fit AP and AC are Comware-based
devices.
{
Lock/Unlock—Allows you to lock/unlock the position of a fit AP on the topology. A fit AP
cannot be moved after being locked.
Perform the following operation on the link between the AC and the specified fit AP:
•
Right-click an primary link between the AC and the fit AP, and then select Link Information from
the shortcut menu. The tip window displays the following link information:
{
Control Channel Security Policy—Security policy of the control channel used by the CAPWAP
tunnel between the AC and the fit AP.
{
Control Channel Startup Time—Start time of the control channel used by the CAPWAP tunnel
between the AC and the fit AP.
{
Data Channel Security Policy—Security policy of the data channel used by the CAPWAP
tunnel between the AC and the fit AP.
{
Data Channel Startup Time—Start time of the data channel used by the CAPWAP tunnel
between the AC and the fit AP.
NOTE:
The Link Information option on the right mouse click menu is available only when both the AC and fit
AP are Comware-based devices.
A right-mouse click on the blank area on the topology will display a menu for pane configuration:
•
Select Show Devices, and then select one of the following options to determine the type of
device to display on the topology:
{
Show Onlines Only—Displays managed fit APs in Online state only.
{
Show Offlines Only—Displays managed fit APs in Offline state only.