Batch binding/unbinding groups with a wlan – H3C Technologies H3C Intelligent Management Center User Manual
Page 90
68
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
2.
Click the Operation icon
for the target AC.
3.
Select WLAN Configuration from the menu.
The WLAN List displays all WLANs on the AC.
4.
Click the Operation icon
for the target WLAN.
5.
Select Modify.
The page for modifying the WLAN appears.
6.
Modify the following parameters for the WLAN as needed:
{
VSC Name—Enter the name of the VSC.
{
Status—Select a WLAN state. Options are Enable and Disable. A WLAN can provide
wireless services only when it is in Enable state.
{
SSID—Enter the unique SSID of the WLAN, a string of 1 to 32 characters. For valid
characters in the SSID string, see "
{
VLAN Tagging—Select whether to enable the WLAN to be bound to a VLAN. Options are
Enable and Disable.
{
VLAN ID—Select the VLAN ID bound to the WLAN. Valid value range is 1 to 4094. All
wireless clients that access the WLAN are added automatically to the bound VLAN. This
field is configurable only when VLAN Tagging is set to Enable.
{
Broadcast SSID—Select whether to enable fit APs to broadcast the SSID in beacon frames. If
you select Enable, fit APs in the group bound with the WLAN periodically advertises their
presences by broadcasting their SSIDs in beacon frames. If you select Disable, the fit APs do
not broadcast their SSIDs, and a client must manually configure the SSID before accessing
the wireless network.
{
Inter-Client Blocking—Select Enable or Disable to enable or disable the inter-client blocking
feature. The inter-client blocking feature disables clients that access the WLAN from
accessing each other.
7.
Modify the following security parameters as needed:
{
Encryption—Select an encryption mode for the WLAN. Options are:
−
None
−
Static WEP
−
Dynamic WEP
−
WPA Pre-Shared Key
−
WPA 802.1X
For different encryption modes, you need to specify different parameters. For more information,
see
.
8.
Click OK.
Batch binding/unbinding groups with a WLAN
This function allows you to view all of the groups bound to a WLAN, bind groups in batches, or
remove group bindings in batches.