H3C Technologies H3C Intelligent Management Center - Manual (Page 574)

552
WSM prompts an alarm according to the action setting. Select Alarm > Alarm Browse from
the navigation tree of IMC to view the warning messages.
{
Groups—All concerned client groups. For more information, see " Managing concerned
client groups ."
{
Admittance Groups—Select concerned client groups from the Groups area to apply the
access control policy and click the Add to icon
to add the selected groups to
Admittance Groups.
Select the groups you want to remove from the Admittance Groups area, and click Remove
from icon
to remove the groups from Admittance Groups.
9. Click OK.
X-Share locating
X-Share locating can only be performed by APs that support X-Share antennas. It locates clients to
locations near the X-Share antenna.
Managing X-Share antennas
To implement X-Share locating, first configure the location and parameters for the X-Share antenna.
Adding an X-Share antenna
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3. Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs and fat APs.
4. Right-click on a blank area, and, from the shortcut menu, select X-Share Antenna Management.
5. Right-click an AP that supports X-Share antennas, and, from the shortcut menu, select Add X-
Share Antenna.
6. In the Add X-Share Antenna dialog box, configure the following parameters:
{
Antenna ID—Select the antenna ID. Options are Ant-1, Ant-2, Ant-3, and Ant-4.
{
Attenuation—Enter the attenuation value.
{
Description—Enter the description for the antenna.
7. Click OK.
8. Drag the X-Share antenna icon to the correct place in the topology according to its actual
location.
Modifying an X-Share antenna
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > View Management > Location Views.
The Location List page appears.
3. Click the View Topology icon for the location view.
The location view topology page appears, displaying all sub-location views, fit APs and fat APs.