H3C Technologies H3C Intelligent Management Center - Manual (Page 228)

206
{
Location—Enter or specify the name of the location view to which the fat AP belongs. WSM
supports fuzzy matching for this field.
An empty field or a field that is set to Unlimited does not serve as a query criterion.
8. Click Query.
The Fat AP List displays all fat APs matching the query criteria. Click Reset to clear the query
criteria and display all fat APs.
9. Select the desired fat AP.
10. Click OK to close the Select Device window.
The Fat AP List displays all selected fat APs.
11. Click OK.
The Result List page appears, displaying the operation result for creating WLAN BSS interfaces
in batches.
12. Click Back to go back to the page for creating WLAN BSS interfaces in batches.
Modifying the port security mode for WLAN BSS interfaces in
batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management appears.
3. Click the Comware-Based tab.
4. In the Fat AP Batch Configuration Management (H3C) area, click the BSS Interface Batch
Configuration link.
The BSS Interface Batch Configuration page appears.
5. Click the Modify Port Security in Batches link.
6. In the Modify Port Security area, set the following parameters, as needed:
{
Interface ID—Enter an interface ID or interface ID range for the WLAN BSS interfaces to be
modified. Separate the ID range with a hyphen (-) (for example, 5-12).
{
Port Security Mode—Select a port security mode for the wireless logical interface. The
options are:
− noRestrictions
− mac-and-psk
− mac-authentication
− mac-else-userlogin-secure
− mac-else-userlogin-secure-ext
− psk
− userlogin-secure
− userlogin-secure-ext
− userlogin-secure-or-mac
− userlogin-secure-or-mac-ext
− userlogin-secure-ext-or-psk