H3C Technologies H3C Intelligent Management Center - Manual (Page 723)

701
4. In the Network Management area, click the AP Model Management link.
The AP Model Management page appears.
The AP Model List displays all AP models.
5. Click the name of the target AP model to view its details.
6. Modify the basic information for the user-defined AP model:
a. Click the Modify icon in the Basic Information field.
The Modify AP Model Information dialog box appears.
b. Enter a new model or vendor.
7. Modify the X-share antenna picture:
a. Click Modify in the X-Share Antenna Picture field.
b. Click Browse… and select a picture.
c. Click OK.
8. Modify the radio parameters for the AP model:
a. In the Radio List, click the Modify icon for the target radio.
b. Modify all radio parameters except Radio ID.
c. Click OK.
9. Delete the selected radio:
a. In the Radio List, click the Delete icon to delete the target radio.
A confirmation dialog box appears.
b. Click OK.
You can only delete the radios on user-defined AP models.
Deleting an AP model
This function enables you to delete the user-defined AP models.
To delete a user-defined AP model:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management page appears.
3. Click the Common tab.
4. In the Network Management area, click the AP Model Management link.
The AP Model Management page appears.
The AP Model List displays all AP models.
5. Continue the procedure using one of the following ways:
{
Click the Delete icon for the target user-defined AP model.
{
Select the user-defined AP model, and, on top of the AP Model List, click Delete.
6. Click OK in the confirmation dialog box