H3C Technologies H3C Intelligent Management Center - Manual (Page 356)

334
the PoE status of AP access ports only when the access device is directly connected to the
fit AP and the access device supports PoE.
{
AP Label—Label of the fit AP. Click the device label link to view its details.
{
SN—Serial number of the fit AP.
{
IP Address—IPv4 address of the fit AP.
{
MAC Address—MAC address of the fit AP.
{
Access Device—Label of the access device to which the fit AP is connected. Click the access
device label to view its details.
{
Access Interface—Name of the AP access port that connects the access device to the fit AP.
{
Collect Time—Time when IMC last collected data through the AP access port that is
connected to the fit AP.
{
Operation—Click the Operation icon for the fit AP to display the Operation menu. The
icon appears only when the fit AP is directly connected to the access device.
From the Operation menu, you can enable or disable the PoE function on a fit AP access
port. For more information, see "
Configuring PoE on a fit AP access port ."
If the Device List contains enough entries, the following navigational aids are displayed:
• Click the Next Page icon to page forward in the Device List.
• Click the Last Page icon to page forward to the end of the Device List.
• Click the Previous Page icon to page backward in the Device List.
• Click the First Page icon to page backward to the front of the Device List.
Click 8, 15, 50, 100, or 200 on the upper right of the Device List to specify the number of items you
want to display on each page.
NOTE:
You can sort the Device List by every field except for the Status and Operation fields. Click the column
label to sort the list by the selected field. The column label allows you to toggle between the sort options
for each field.
Collecting information about fit AP access ports
This function allows you to manually collect information about AP access ports and synchronize
statistics to the device list. In addition, WSM automatically collects information about AP access ports
at 14:00 every day.
To collect information about fit AP access ports:
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Resource Management > AP Access Ports.
The AP Access Ports page appears.
3. Click the Fit AP tab.
The Device List page displays all fit AP access ports and the related fit AP information.
4. Click Collect Data.
WSM begins collecting data from all fit AP access ports. Refresh the page later to view the
results.