Querying sensors, Adding a sensor – H3C Technologies H3C Intelligent Management Center User Manual
Page 457
435
Querying sensors
WSM provides basic query and advanced query. Basic query criteria include several key parameters
for quick search. Advanced query offers various query criteria for precise match.
To query sensors:
1.
Click the Service tab.
2.
Select WLAN Manager > WIPS Management > Sensor Management from the navigation tree.
The sensor list displays all sensors.
3.
Perform a basic query:
a.
Enter the name of the virtual security domain. WSM supports fuzzy matching for this field.
b.
Click the Query icon
. The sensor list displays all sensors matching the query criteria.
4.
Clear the Query box, and click the Query icon
to display all sensors.
5.
Perform an advanced query:
a.
Click next to the Query field to expand the Query area. Click it again to hide the Query
area.
b.
Enter or select one or more of the following query criteria:
{
AP Label—Enter a partial or complete AP label. WSM supports fuzzy matching for this field.
{
Virtual Security Domain—Enter a partial or complete virtual security domain name to display
all sensors that are bound to the domain. WSM supports fuzzy matching for this field.
{
Status—Select the online status of the sensor. Options are All, Online, and Offline.
{
Detection Mode—Select the detection mode of the radio. Options are All, Access First,
Detection First, Hybrid Mode, and Detection Only.
{
AC—Select the AC with which the sensor associates.
c.
Click Query.
The sensor list displays all matching sensors.
d.
Click Reset to clear the query criteria and display all sensors.
Adding a sensor
This function enables you to add a sensor and specify the detection mode for radios.
To add sensors:
1.
Click the Service tab.
2.
Select WLAN Manager > WIPS Management > Sensor Management from the navigation tree.
The sensor list displays all sensors.
3.
Click Add.
The Add Sensor page appears.
4.
Select a detection mode for the radios from the Detection Mode list. Options are Access First,
Detection First, Hybrid Mode, and Detection Only.
For more information about the detection modes, see "
5.
Click Select below the radio list and select radios from the Add Sensor page by using the
following process: