H3C Technologies H3C Intelligent Management Center - Manual (Page 264)

242
{
AP Name—Enter the name of the fit AP. WSM supports fuzzy matching for this field
{
Serial Number—Enter the serial number of the fit AP. WSM supports fuzzy matching for this
field.
{
IP Address—Enter a partial or complete IPv4 address of the fit AP. WSM supports fuzzy
matching for this field.
{
AP Alias—Enter the alias of the fit AP. WSM supports fuzzy matching for this field.
{
SSID—Enter the SSID corresponding to the WLAN bound to the group to which the fit AP
belongs. WSM supports fuzzy matching for this field.
{
MAC Address—Enter the MAC address of the fit AP. WSM supports fuzzy matching for this
field.
{
Channel—Enter the working channel of the fit AP. WSM supports fuzzy matching for this
field.
{
Device Model—Enter the device model of the fit AP. WSM supports fuzzy matching for this
field.
{
VLAN ID—Enter the VLAN ID corresponding to the WLAN bound to the group to which the
fit AP belongs. WSM supports fuzzy matching for this field.
{
Device Status—Select a device state for the fit AP. Options are:
− Unlimited
− Critical
− Major
− Minor
− Warning
− Normal
− Unmanaged
− Unknown
{
Radio Type—Select a type of the radio from the list. Options are:
− All
− 802.11a
− 802.11b
− 802.11g
− 802.11bg
− 802.11at
− 802.11an
− 802.11gn
− 802.11n (2.4GHz)
− 802.11bgn
− 802.11n
− 802.11n (5GHz)
{
Filter Duplicate SN—Filter or do not filter duplicate serial numbers. Options are Yes and No.
This field is invalid for MSM series and Cisco fit APs.
{
Online Status—Select an online state for the fit AP. Options are Unlimited, Online, Online
(Primary), Online (Secondary), and Offline. MSM series and Cisco fit APs do not have