Deleting a service policy – H3C Technologies H3C Intelligent Management Center User Manual
Page 131
109
11.
Click Unbind.
WSM checks the radios in the list one by one. If any binding to the service policy is found,
WSM removes the binding. After the process is complete, the Result List page appears,
displaying the operation results for removing bindings between service policies and radios.
To remove bindings between radios and a service policy:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs. The AC List
page displays all ACs.
3.
Click the Operation icon
for the target AC.
4.
Select
Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on Service Policy List.
5.
Click the Operation icon
for the service policy from which you want to unbind radios.
6.
Select Bound Radios
from the menu.
The Radio List dialog box appears.
7.
Select the radios to be unbound.
8.
Set the following parameters as needed:
{
Synchronize AC Configuration—Unbind radios from the service policy on all ACs in the
specified AC group. To unbind radios from the service policy only on the current AC, do not
select this option. This option is available only when the AC belongs to at least one AC
group.
{
AC Group—Select an AC group. Options are all AC groups to which the current AC belongs.
This option is available only when Synchronize AC Configuration is selected.
9.
Click Unbind.
The Result List page appears, displaying the operation results for unbinding radios from the
service policy.
10.
Click Back to close the dialog box.
Deleting a service policy
To delete a service policy that has been bound to radios, first unbind the radios from the service
policy.
To delete a service policy:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > ACs.
The AC List page displays all ACs.
3.
Click the Operation icon
for the target AC.
4.
Select
Service Policy from the menu.
The Service Policy Management page appears. All the service policy information of the AC is
displayed on Service Policy List.
5.
Click the Operation icon
for the service policy you want to delete.
6.
Select
Delete from the menu.