H3C Technologies H3C Intelligent Management Center - Manual (Page 351)

329
Table 22 Security information
Encryption mode Security information
None No security parameters are needed.
Static WEP
• Key Length—Select a key length from the list. Options are 64 bits and
128 bits.
• Key Type—Select a key type from the list. Options are ASCII and
HEX.
• Key Index—Select a key index from the list. Options are 1, 2, 3, and
4.
• Key—Enter a key value. For a 64-bit key, enter a string of five
alphanumeric characters or a 10-digit hexadecimal number. For a
128-bit key, enter a string of 13 alphanumeric characters or a 26-digit
hexadecimal number.
Dynamic WEP
• RADIUS Accounting—Enter the accounting profile name configured
on the RADIUS server.
• Address (Primary RADIUS Server)—Enter the IP address or domain
name of the primary RADIUS server.
• Port—Enter the port for authentication of the RADIUS server.
• Secret—Enter the password used for communication between the AC
and the RADIUS server.
• Retry Interval (s)—Enter the retry interval after the communication
between the AC and RADIUS server times out.
• Retry Timeout (s)—Enable or disable setting the retry timeout for the
communication between the AC and RADIUS server. Enter the retry
timeout in the box if you enable the function. For example, if you
select Retry Timeout(s) and enter 10 in the box, the communication
between the AC and the RADIUS server times out if the RADIUS does
not respond within 10 seconds. If you disable this option, the AC
determines whether the communication times out according to the
default response timeout on the RADIUS server.
• Secondary RADIUS Server—Enable or disable the secondary RADIUS
server. If you enable the server, set the Address (Secondary RADIUS
Server) and Secret options for the server.
• Address (Secondary RADIUS Server)—Enter the IP address or domain
name of the secondary RADIUS server.
• Secret—Enter the password used for communication between the AC
and the secondary RADIUS server.
WPA Pre-Shared Key
• Version—Select a WPA version from the list. Options are WPA,
WPA2, and WPA or WPA2.
• Cipher—Select an encryption mode from the list. Options are TKIP,
CCMP (AES), and TKIP + CCMP (AES).
• Key Type—This field is always ASCII and cannot be modified.
• Pre-Shared Key—Enter the preshared key.