H3C Technologies H3C Intelligent Management Center User Manual
Page 295
273
−
802.11g
−
802.11gn
−
802.11an
The type of a radio cannot be modified when the radio is bound to an enabled mesh profile.
•
Admin Status—Select the administrative state for the radio. Options are Up and Down.
•
Channels in Use—Select the working channel of the radio. The value range depends on the
radio type. If you select Auto, the fit AP evaluates the channel quality and selects an optimum
channel as the working channel. You cannot bind the fit AP to a mesh profile in this scenario
and you must select None from the Mesh Profile ID list.
•
Max Transmission Power (dBm)—Enter the maximum transmission power of the radio.
•
Current Transmission Power (dBm)—Enter the current transmission power of the radio.
•
Radio Policy—Select the radio policy to be bound to the radio. Options are all existing radio
policies in WSM.
•
MP Policy—Select the MP policy to be bound to the radio. Options are all existing MP policies in
WSM.
•
Mesh Profile ID—Select the mesh profile to be bound to the radio. Options are None and all
existing mesh profiles in WSM.
•
Dot11n Channelband—Select the dot11n channel band. Options are 20MHz and 40MHz. This
parameter is available only when the radio type is 802.11an or 802.11gn.
•
A-MPDU Enable—Enable or disable A-MPDU. This option is available only when the radio type
is 802.11an or 802.11gn.
•
A-MSDU Enable—Enable or disable A-MSDU. This option is available only when the radio type
is 802.11an or 802.11gn.
•
Client Dot11n only—Select this option to restrict the fit AP to be associated with dot11 clients only.
This option is available only when the radio type is 802.11an or 802.11gn.
•
Short G1 Enable—Enable or disable short GI. This option appears only when the radio type is
802.11an or 802.11gn.
•
Channel Calibration Lock down—Lock or do not lock the working channel of the radio. If you
select Yes, the fit AP locks the current working channel and its working channel is not
automatically adjusted by the AC. If you select No, the working channel of the radio is
automatically adjusted by the AC.
Before you set this option, enable DFS on the AC to which the fit AP is connected. For more
information, see "
." With DFS enabled, the AC selects an optimal
channel for each AP in real time to avoid co-channel interference and interference from other
radio sources.
•
Power Calibration Lock down—Lock or do not lock the current transmission power of the radio. If
you select Yes, the fit AP locks the current transmission power and its transmission power is not
automatically adjusted by the AC. If you select No, the transmission power of the radio is
automatically adjusted by the AC.
Before you set this option, enable TPC on the AC to which the fit AP is connected. For more
information, see "
Configuring an RRM calibration group
." With TPC enabled, the AC
dynamically adjusts the transmission power of each fit AP.
•
WMM Enable—Enable or disable WMM for the radio. WMM is a wireless QoS protocol
designed to preferentially transmit packets with high priority, and guarantees better QoS services
for voice and video applications in a wireless network. The WMM protocol is the foundation of