H3C Technologies H3C Intelligent Management Center - Manual (Page 493)

471
Click 8, 15, 50, 100, or 200 from the right side of the main pane to specify the number of items you
want to display on each page.
NOTE:
You can sort the Alarm Ignored Address List by the MAC Address, First Detection Time, Last Detection
Time, Alarm Ignoring Count and Detected AC fields. Click the column label to sort the list by the
selected field. The column label allows you to toggle between the various sort options specific to each
field.
Synchronizing alarm-ignored addresses
By default, IMC synchronizes the alarm-ignored address list from managed ACs every 2 hours. You
can also manually perform the synchronization operation.
To manually synchronize the alarm-ignored address list from managed ACs:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Alarm Ignored Address List tab.
The Alarm Ignored Address List displays all alarm-ignored devices.
4. Click Synchronize.
The page is refreshed to display the most recent alarm-ignored address list after the
synchronization process is completed.
Querying alarm-ignored addresses
To perform a basic query:
1. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
2. Click the Alarm Ignored Address List tab.
The Alarm Ignored Address List displays all alarm-ignored addresses.
3. Enter an alarm-ignored address next to the query field. WSM supports fuzzy matching for this
field.
4. Click the Query icon . The Alarm Ignored Address List displays all alarm ignored addresses
matching the query criteria.
5. Clear the Query field, and click the Query icon to display all alarm ignored addresses.
To perform an advanced query:
1. Click the Service tab.
2. Select WLAN Manager > WIPS Management > Dynamic Detection Information from the
navigation tree.
3. Click the Alarm Ignored Address List tab.
The Alarm Ignored Address List displays all alarm-ignored addresses.
4. Click the Advanced icon next to the query field to expand the area.
5. In the Query Criteria area, specify one or both of the following query criteria:
{
MAC Address—Enter a partial or complete MAC address in the format of xx:xx:xx:xx:xx:xx.
WSM supports fuzzy matching for this field.