9 managing msm series fat aps, Viewing the fat ap list – H3C Technologies H3C Intelligent Management Center User Manual
Page 193
171
9 Managing MSM series fat APs
WSM enables administrators to manage MSM series fat APs. IMC WSM automatically manages all
fat APs that are added to the IMC Platform.
shows the MSM series fat AP network.
Figure 52 Fat AP network
Before you create a fat AP network in WSM, complete the following tasks:
•
Configure the fat AP so that it can access the network.
•
Configure SNMP communities on the fat AP, and specify the WSM server host (by IP address) as
the management console of the fat AP.
•
Add the fat AP to the IMC Platform.
To create a fat AP network in WSM:
1.
Add WLANs in batches for the fat APs, and bind the WLANs to the radios of the fat APs so that
the fat APs can provide wireless service.
For more information about configuring WLANs, see "
."
2.
Optional: Configure the same parameters for more radios in batches on the fat AP to reduce
repetitive operations and improve efficiency.
For more information about configuring radios in batches, see "
Viewing the fat AP list
The Fat AP List page displays information about all managed fat APs in IMC, including the fat AP
status, device label, model, IP address, number of online clients, last synchronization time, and
synchronization result.
To view the fat AP list:
1.
Click the Service tab.