H3C Technologies H3C Intelligent Management Center - Manual (Page 227)

205
{
Exceptional Deauthenticated Clients—Number of exceptional deassociations between clients
and the fat AP.
Radio Information contents
{
ID—ID of the radio.
{
Interface—Radio interface that connects the radio to the fat AP.
{
Radio Type—Type of the radio. The value depends on the fat AP model.
{
Channel—Working channel of the radio. The value range depends on the radio type. If you
select Auto, the fat AP evaluates the channel quality and selects an optimum channel as the
working channel.
{
Current Transmission Power (dBm)—Current transmission power of the radio, in dBm.
{
Operation—Provides the Modify and Configure Mesh Peer MAC Address options.
Operators can click the Modify icon to modify radio parameters, and click the Configure
Mesh Peer MAC Address icon
to configure neighbor MAC addresses for a fat AP. For
more information, see " Configuring a radio policy " and " Configuring a mesh peer MAC
address for a fat AP ."
Configuring WLAN BSS interfaces in batches
WLAN BSS interfaces of fat APs are bound to service policies. WSM enables operators to create and
delete WLAN BSS interfaces in batches, and modify the port security mode and VLANs for multiple
fat APs in batches.
Creating WLAN BSS interfaces in batches
1. Click the Service tab.
2. From the navigation tree, select WLAN Manager > Configuration Management.
The Configuration Management appears.
3. Click the Comware-Based tab.
4. In the Fat AP Batch Configuration Management (H3C) area, click the BSS Interface Batch
Configuration link.
The BSS Interface Batch Configuration page appears.
5. In the Interface ID box in the Add Interface area, enter an interface ID or ID range.
You must separate the ID range with a hyphen (-) (for example, 5-12).
6. In the Fat AP List area, click Add.
The Select Devices dialog box appears.
7. Enter or specify one or more of the following query criteria to search for the fat APs you want to
configure:
{
Device Label—Enter the label of the fat AP. WSM supports fuzzy matching for this field.
{
IP Address—Enter a partial or complete IPv4 address of the fat AP. WSM supports fuzzy
matching for this field.
{
Model—Enter the model of the fat AP. WSM supports fuzzy matching for this field
{
Connectivity Status—Select a connectivity state for the fat AP. Options are Unlimited,
Reachable, and Unreachable.