H3C Technologies H3C Intelligent Management Center - Manual (Page 181)

159
8 Managing Aruba ACs
WSM enables you to manage the WLAN constructed by Aruba ACs and fit APs. To manage an
Aruba AC, add the Aruba AC to the IMC Platform first. IMC automatically adds it to WSM. You can
manage the WLANs, AP groups, and radio policies on an Aruba AC.
IMC uses the SNMP and Telnet protocols to obtain AC information and apply configurations. To
manage an AC through WSM, you must configure correct SNMP and Telnet parameters for the AC
on the IMC Platform. The SNMP and Telnet parameters on the IMC Platform must be the same as the
parameters on the AC. Otherwise, IMC cannot identify the AC. For more information about
configuring the SNMP and Telnet parameters, see IMC Base Platform Administrator Guide.
Viewing the AC list
For more information, see " Viewing the AC list ."
Querying an AC
For more information, see " Querying ACs ."
Viewing detailed information about an AC
1. Click the Service tab.
2. From the navigation tree, select Wireless Manager > Resource Management > ACs.
3. Click the device label for the target Aruba AC to enter its detailed information page.
The Service Monitoring, Trap Destination, and Performance Monitor information for Aruba ACs
is the same as ACs of other manufacturers. For more information, see "
Viewing detailed
information about an AC ."
4. Click the Wireless Service Information tab.
Global Parameter Information
{
Max APs—Maximum number of APs that the AC can manage.
AP Information
{
Online Fit APs—Number of online APs managed by the AC.
{
Offline Fit APs—Number of offline APs managed by the AC.
Client Information
{
Online Clients—Number of online clients associated with the AC.
5. Click Wireless Service to the right of the page to view the configuration functions.
You can click Group Configuration, WLAN configuration, or Radio Policy to enter the relevant
configuration page.