Locating a client, Locating a client to map, Performing real-time monitoring for a client – H3C Technologies H3C Intelligent Management Center User Manual
Page 321
299
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click the Operation icon
of a client and select Modify Client Info.
Operators can modify the client information as needed. For more information about modifying
the client information, see "
."
If the target client has no information, select Modify Client Info and add the basic client
information as needed. For more information about adding the client information, see
"
."
Locating a client
WSM allows you to locate a client on the client list. The result is displayed in the location view
topology.
To locate a client:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click the Operation icon
of a client and select
Locate.
The client is displayed and highlighted in the location view topology. Before you locate a client,
perform relevant configurations in advance. For more information, see "
Locating a client to map
This function allows you to immediately locate a client to the Mapbar map.
To locate a client to map:
1.
Click the Service tab.
2.
From the navigation tree, select WLAN Manager > Resource Management > Clients.
The Clients page displays all clients.
3.
Click the Operation icon
of a client and select Locate to Map.
The location of the client is displayed and highlighted on the Mapbar map. Before you locate a
client to map, perform relevant configurations in advance. For more information, see "
Performing real-time monitoring for a client
WSM provides the real-time monitoring function for online clients on the client list.
shows
real-time monitoring information of clients.