Adobe After Effects CS4 - Manual (Page 527)

521 USING AFTER EFFECTS CS4
Effects and animation presets
Last updated 12/21/2009
6 Adjust the Matching Softness controls to determine the width of the transition band between completely matched
and completely unmatched pixels or how smoothly the affected areas blend with the original image.
7 Select Invert Match if you want to invert the matte so that the white areas become black and the black areas become
white. (The matching color is black in the matte and is processed by the grain effect regardless of the Amount
setting. The inversion doesn’t affect any other settings.)
8 If you’re using both a color matte and a layer mask, choose one of the following from the Combine Match And
Mask Using menu:
Screen Makes the matte white wherever either the mask or the color match is white.
Multiply Makes the matte white where both of the inputs are white.
9 Choose Final Output from the Viewing Mode control.
Generate a layer matte
In some cases, you may want to use a different layer or track as a mask for the layer that uses a grain effect. This type
of mask allows unlimited control over exactly which parts of an image are modified and by how much.
1 Apply a grain effect to the image.
2 In the Effect Controls panel, choose the layer that you want to use as a mask from the Mask Layer control in the
Blend With Original and Masking Layer controls groups.
3 Choose a masking mode from one of the standard track matte mode options.
4 If the masking layer is a different size than the current layer, choose one of the following from the If Mask Size
Differs pop-up menu in the Masking Layer controls:
Center Centers the masking layer over the current layer.
Stretch To Fit Resizes the masking layer to match the dimensions of the current layer.
5 If you’re using both a color matte and a layer mask, choose one of the following from the Combine Match And
Mask Using menu:
Screen Makes the matte white wherever either the mask or the color match is white.
Multiply Makes the matte white where both of the inputs are white.
6 Choose Final Output from the Viewing Mode control.
Change the preview region
You can use the Preview Region controls group to change the position or the size of the preview region for a grain
effect.
Because adding or removing grain can affect sharpness of detail, you may want to preview an area of fine detail, such
as a human face or some text. When you remove grain with the Remove Grain effect, a best practice is to preview an
area where the grain is most clearly visible or most objectionable, such as a large expanse of solid color.
You’ll achieve the best results by experimenting, applying small increments to each of several controls in the Effect
Controls panel, and viewing the results in the Composition panel after every adjustment.
1 After applying a grain effect, click the Center button in the Preview Region group of controls in the Effect
Controls panel.
A cross hair is centered in the Composition panel.
2 In the image, click the desired center of the preview region.