Metrohm 746 VA Trace Analyzer - Manual (Page 99)

4 Introduction to the operation
746 VA Trace Analyzer / 747 VA Stand
4-14
Method: TESTPb CALCULATION
max. 15 lines
Quantity Formula (R##, C##, A##) Res.unit Sig.dig.
ДДДДДДДДДДДД ДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДДД ДДДДДДДД ДДДДДДДД
ДДДДДДДД ДДДДДДДД
Pb R1000=MC:Pb #g/L 4
Modify
column
Modify
line
Delete
line
Insert
line
New
calcul.
Upd.from
method
Syntax
check
On the dialog page "CALCULATION", maximum 15 formulae for the calculation of the
final results as well as the designations of the result quantities and units can be entered.
You will find further information regarding this dialog page in section 5.6.4.
• In the present example, the standard formula for lead is entered. As the
result, the mass concentration of lead ( MC:Pb ) determined using the
standard addition is outputted in g/L with 4 significant figures.
5 Switch to dialog page "DOCUMENTATION"
• Press the yellow key. The dialog page "DOCU-
MENTATION" appears for the automatic output of reports and curves:
Method: TESTPb DOCUMENTATION
Output
Auto form feed no Auto error printing no
COPY Reports, Curves TO Destination
–––––––––––––––––––––––––––––––––––––––––––––––––– ––––––––––––––––––––
Report Full Printer
Curve Smth Sbst:Pb VR:** Printer
Curve Cal Sbst:Pb Printer
Modify
column
Modify
line
Delete
line
Insert
line
Exec.
line
Exec.
all
>>
Comment