Metrohm 746 VA Trace Analyzer - Manual (Page 211)

5.4 Storages
746 VA Trace Analyzer / 747 VA Stand
5-60
Softkeys Meaning
Copy
prev.
Copy previous line
The contents of the preceding line are copied into the line selected
with the field cursor (any existing entries will be overwritten).
The number in the
Pos. field is incremented automatically by the
value defined in the parameter Autoincrement .
Check
samples
Check sample data
The sample data entered in the table are checked. Any errors will be
displayed.
Rename
table
Change name of sample data table
Possibility to change the name of the sample data table (see pa-
rameter
Name ).
>> Switch to additional softkeys
Print
all
Print list of all samples
The "SAMPLES" page is printed with all sample data entries.
Copy to
Data Cd.
Copy sample data to data card
The sample data entered on this page are copied to the data card; the
file name entered under
Name is automatically assigned the extension
.smp .
To reload a sample data file stored on the data card in this manner, it
must be copied to the working memory on the "DATA CARD" page
using the softkeys
.
Copy to
RS Ifc.1
Copy sample data to RS interface 1
The sample data entered on this page are copied to RS232 interface
1, i.e. to the PC connected to it; the file name entered under
Name is
automatically assigned the extension .smp .
Copy fr.
RS Ifc.1
Copy sample data from RS interface 1 to working memory
The sample data are copied from RS232 interface 1, i.e. from the PC
connected to it to the sample data table on this page; existing data
will be overwritten.
Change
Autoinc.
Change increment for automatic numbering
Possibility to change the increment for the automatic numbering in the
Pos. column (see parameter Autoincrement ).
Balance
on / off
Switch data input from balance on/off
On/off switching of the automatic data input from a balance attached
to RS232 interface 2. Whether the data receipt is switched on or off is
shown by the
Balance input parameter.
For the attachment of balances, see section 3.12.3.