beautypg.com

6 warranty – Metrohm 746 VA Trace Analyzer User Manual

Page 593

background image

9 Scope of delivery, Options, Warranty

746 VA Trace Analyzer / 747 VA Stand

9-14

9.6

Warranty

The warranty on our products is limited to defects that are traceable to material,

construction or manufacturing error which occur within 12 months from the day of

delivery. In this case, the defects will be rectified in our workshops free of charge.

Transport costs are to be paid by the customer.
For day and night operation, the warranty is limited to 6 months.
Glass breakage in the case of electrodes or other parts is not covered by the war-

ranty. Checks which are not a result of material or manufacturing faults are also

charged during the warranty period. For parts of outside manufacture insofar as

these constitute an appreciable part of our instrument, the warranty stipulations of

the manufacturer in question apply.
With the regard to the guarantee of accuracy, the technical specifications in the in-

struction manual are authoritative.
Concerning defects in material, construction or design as well as the absence of

guaranteed features, the orderer has no rights or claims except those mentioned

above.
If damage of the packaging is evident on receipt of a consignment or if the goods

show signs of transport damage after unpacking, the carrier must be informed im-

mediately and a written damage report demanded. lack of an official damage report

releases Metrohm from any liability to pay compensation.
If any instruments and parts have to be returned, the original packaging should be

used if at all possible. This applies above all to instruments, electrodes, burette

cylinders and PTFE pistons. Before embedment in wood shavings or similar mate-

rial, the parts must be packed in a dustproof package (for instruments, use of a

plastic bag is imperative). If open assemblies are enclosed in the scope of delivery

that are sensitive to electromagnetic voltages (e.g. data interfaces etc.) these must

be returned in the associated original protective packaging (e.g. conductive protec-

tive bag). (Exception: assemblies with built-in voltage source belong in a non-

conductive protective packaging). For damage which arises as a result of non-

compliance with these instructions, no warranty responsibility whatsoever will be

accepted by Metrohm.