Metrohm 746 VA Trace Analyzer User Manual
Page 170
5.3.1 VA TRACE ANALYZER
746 VA Trace Analyzer / 747 VA Stand
5-19
Parameter
Range; Default value / Meaning
Receive mode
on, off; off
Receive mode
Receive mode for RS232 interface (on, off).
off
means that the
receipt of data via the interface is blocked, but data output is possible
(details, see section 8.3).
Balance type
none, Mettler, Mettler AT, Sartorius, Precisa, AND; none
Balance type
Selection of the balance type for RS232 interface 2 (manufacturer and
model). You will find further details on the attachment of balances and
the required settings in section 3.12.3.
Printer type
none, IBM Propr., Epson 80*60, Epson 60*72, HP Deskjet,
HP Thinkjet, HP Thinkj.E; none
Printer type
Selection of the printer driver for the external printer attached to RS232
interface 1 or 2.
none
no printer attached
IBM Propr.
IBM Proprinter and printers with IBM emulation
Epson 80*60
EPSON printers and printers with EPSON emu-
lation with 80
×
60 dpi graphics resolution (24-
pin dot matrix, ink jet and laser printers)
Epson 60*72
EPSON printers and printers with EPSON emu-
lation with 60
×
72 dpi graphics resolution (9-pin
dot matrix, ink jet and laser printers)
HP Deskjet
HP printers (HP DeskJet, HP LaserJet) and
printers with HP PCL3 emulation
HP Thinkjet
HP ThinkJet, HP QuietJet and compatibles
HP Thinkj.E
HP ThinkJet in EPSON mode and compatibles
You will find further details on the attachment of printers and the
required settings in section 3.12.2.
Printer width
0.10...1.00; 1.00
Printing width
Selection of the printing width for the graphics printout. The normal
printing width (
1.00
) can be reduced by up to a factor of 10 if need be.
Remote keyboard
off, send, receive; off
Remote keypad mode
The key code of the 746 VA Trace Analyzer can be sent to RS232
interface 1 or received from there. This allows, e.g. remote control of
the VA Trace Analyzer by a PC by sending directly keyed in or stored
key entries to the VA Trace Analyzer.
off
off
send
send key code
receive
receive key code
(
Receive mode
must be set to
on
for this)
Ctrl.lines
# 87654321
display only
Control lines 1...8
Title for the 8 input and 8 output control lines of the remote interface.