Metrohm 746 VA Trace Analyzer - Manual (Page 229)

5.5 Operation
746 VA Trace Analyzer / 747 VA Stand
5-78
Parameter Range; Default value / Meaning
The display of no means that the determination has not been
changed.
Once a determination has been modified, it can no longer be forced to
the unmodified condition no . If you wish to keep the determination in
the unmodified condition, it must be stored in the "DETERMINATIONS"
memory or on the "DATA CARD" before the change.
Sample table display only
Name of the sample data table
Name of the sample data table from which the sample data of the
determination loaded in the working memory have been automatically
fetched (
Auto.samples = on ).
The display of – means that the sample data have not been fetched
from a sample data table ( Auto.samples = off ).
1 st sample data
line
Input possibilities, see under the individual parameters
Sample data of current sample
Display of the current sample data. The layout of this line is identical
to that of the lines on the "SAMPLES" page (see section 5.4.4). The
meaning of the displayed data and the input possibilities depend on
the instrument status:
• In the standby mode * READY * , data specific to the sample can
be entered here and can be used for the next determination in
certain cases (see Table).
• During an ongoing determination ( * BUSY * status), the data of
the current sample are displayed and can not be modified at this
time.
What happens to the sample data entered in this line when
is pressed depends on possible entries in the 2
nd sample data line as
well as on the setting of the two parameters Auto.samples and
Auto.batch :
1 st line 2 nd line Auto.samples Auto.batch Determination
filled blank off off Single determination with
sample data of the 1
st line
filled or
blank
filled off off Single determination with
sample data of the 2
nd
line
filled blank off on Series determination with
sample data of the 1
st
line
filled or
blank
filled off on Series determination with
sample data of the 2
nd
line
filled or
blank
filled or
blank
on off Single determination with
automatic sample data
transfer from "SAMPLES"
filled or
blank
filled or
blank
on on Series determination with
automatic sample data
transfer from "SAMPLES"