Metrohm 746 VA Trace Analyzer - Manual (Page 209)

5.4 Storages
746 VA Trace Analyzer / 747 VA Stand
5-58
Parameter Range; Default value / Meaning
Files display only
Number of files
Display of the number of stored files (maximum 256 files can be
stored).
Available display only
Free storage space
Display of the free storage space in bytes.
Capacity display only
Storage capacity of data card
Display of the storage capacity of the data card in bytes.
Label display only
Title of data card
Display of the card title entered during formatting.
File 8 characters;
File name
In copying a file from the working memory to the data card, the
extension
.mth (methods), .dtm (determinations), .smp (sample
data) or .aut (rack data) is appended automatically, depending on
the type of file copied. The first 8-character part of the file name can
be changed, however the extension must be retained as it character-
izes the type of file.
Secured files ( * ) must first be unsecured with before their
name can be changed.
For the file name all characters are allowed with the exception of the
character " . ".
Content 50 characters;
Content information for file
In copying a method from the working memory to the data card, the
method title
Title entered on the "OP.SEQUENCE" page is entered
in this column.
In copying a determination from the working memory to the determi-
nation list, the three parameters
Sample table , S1 and Method call
are entered automatically if they were available on the "MONITORING"
or "SAMPLES" page at the time of recording.
This 50-character content information can be changed at will and is
retained in direct copying to the data card or the RS interfaces.
However, if the file is loaded in the working memory and then copied
from there to another destination, this content information will be lost.
Secured files ( * ) must first be unsecured with before their
title can be changed.
Size display only
Memory size
Display of the memory requirements of the file in bytes.