Metrohm 746 VA Trace Analyzer - Manual (Page 356)

5.7.3 Alphabetical instruction list
746 VA Trace Analyzer / 747 VA Stand
5-205
(CASE Page: O, S Stand: M, A Abbreviation: (CAS
Instructions t/s Main parameters Auxiliary parameters
––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––
## .. (CASE ..... Calc.f.
Function Start of a decision block with decision whether or not the subsequent
instructions should be executed.
Parameter Range; Default value / Meaning
(Test) EV:,MC:,S0,S1,S2,S3,V0 <,<=,>=,> const.,C##;
STATE =,<> ctrl.line code; -
Test condition for decision
The following test conditions can be entered in the field under Main
parameters :
EV: < | <= | >= | > const. / C##
MC: < | <= | >= | > const. / C##
S0 < | <= | >= | > const. / C##
S1 < | <= | >= | > const. / C##
S2 < | <= | >= | > const. / C##
S3 < | <= | >= | > const. / C##
V0 < | <= | >= | > const. / C##
STATE = | <> ctrl.line code
The terms have the following meaning:
EV: Evaluation value ( I.peak , I.wave, P.peak or
t.peak ) for the specified substance (
= substance name) in A, W, or s
MC: Mass concentration ρ
ss
for the specified sub-
stance ( =substance name) in g/L
S0 Sample size S0 in g or L
S1,S2,S3 Sample specific variables S1 , S2 , S3
V0 Sample volume V0.sample in measuring
vessel in L
STATE State of the input control lines 1...8 of the
remote interface
const. Constant (numeric value)
C## Common variable C01 ... C18 from the
working storage (see section 5.4.5)
ctrl.line code 8-digit numeric code for the state of the in-
put control lines 1...8. The following values
can be entered for each line:
0 off, inactive (5 V)
1 on, active (0 V)
* immaterial