Metrohm 746 VA Trace Analyzer - Manual (Page 11)

1 Introduction
746 VA Trace Analyzer / 747 VA Stand
1-2
1.2 Information about the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 746 VA Trace Analyzer and 747 VA Stand into operation. The
Instructions for Use contain information and warnings to which the
user must pay attention in order to assure safe operation of the instru-
ments.
1.2.1 Organization
These 8.746.1033 Instructions for Use for the 746 VA Trace Analyzer and the 747
VA Stand provide a comprehensive overview of the installation, operation, fault rec-
tification and technical specifications of these instruments. The Instructions for Use
are divided into the following 10 sections:
Section 1 Introduction
Section 2 Parts and controls
Numbers and designations of the parts and controls
Section 3 Installation
Installation of 746 VA Trace Analyzer and 747 VA Stand
Installation of working, reference and auxiliary electrodes
Attachment of 685 Dosimats and 700 Dosinos
Attachment of devices via RS232 and remote interface
Section 4 Introduction to operation
Introduction to the operation using simple examples
Section 5 Operation
Detailed description of the operation
Explanation of all key functions
Explanation of all dialog pages with parameters and softkeys
Explanation of all program instructions
Section 6 Data processing and evaluation
Description of all steps in data acquisition, data processing
and evaluation
Section 7 Safety, errors, troubleshooting, diagnosis, GLP
Electrical safety, safety considerations in the handling of
mercury, detailed list of the error messages, troubleshooting,
instrument diagnosis and GLP method
Section 8 Technical data
Section 9 Scope of delivery, options, warranty
Section 10 Index
To find the required information on the instruments please use either the Table of
contents or the Index at the back.