Metrohm 746 VA Trace Analyzer - Manual (Page 208)

5.4.3 DATA CARD
746 VA Trace Analyzer / 747 VA Stand
5-57
Softkeys Meaning
Working
determ.
Determination from the working memory (an unsecured determination
with the same name will be overwritten)
RS232
Ifc.1
RS232 interface 1, i.e. the PC connected to it
RS232
Ifc.2
RS232 interface 2, i.e. the PC connected to it
Unselect
file(s)
Cancel selection
The selection of the files marked by an arrow –> is canceled.
Change
display
Change display type
Switching between the space-saving display mode with file names in
4 columns and the display mode with name, contents and size.
>> Switch to additional softkeys
Print
all
Print list of all files
The " DATA CARD" page is printed out with all file entries.
Select
all
Select all files
All files on the page are selected and marked by an arrow –> .
Recalc.
file(s)
Recalculate selected file(s)
All determinations selected and marked by an arrow –> are recalcu-
lated with the method currently loaded in the working storage. For
each of the selected determinations, a recalculation
from original
and a recalculation from Op. Sequence (see softkey on
the "MONITORING" page, section 5.5.1) using the originally recorded
experimental data and the modified method parameters is performed.
The result of the recalculation is seen on the reports and/or curves
defined on the "DOCUMENTATION" page which are automatically
outputted to the printer or RS interfaces.
Make sure that only determinations are selected for recalculation which
were recorded with a method whose name Method is identical to the
method name of the method currently loaded in the working storage.
The result of the recalculation is not stored automatically in the deter-
mination file.
Secure/
Unsecure
Secure/unsecure selected file
The file selected with the cursor is secured (marking * appears on
the left next to the file name) or unsecured (marking * is deleted).
Secured files can not be deleted or overwritten.
Format
card
Reformat data card
The data card is reformatted, all existing data will be lost. After confir-
mation with
y , an inquiry concerning the card title Label of this Data
card ? appears. A title of max. length 20 characters can be entered
and will henceforth be displayed under the Label parameter.
Sort Sort files alphabetically
The files are sorted alphabetically. Here, numbers take precedence
over letters, uppercase letters precedence over lowercase letters.