Metrohm 746 VA Trace Analyzer - Manual (Page 234)

5.5.2 RESULTS
746 VA Trace Analyzer / 747 VA Stand
5-83
Parameter Range; Default value / Meaning
Method display only
Method name
Name of the method loaded in the working memory (file name without
extension
.mth ).
Determ. display only
Determination name
Name of the determination loaded in the working memory (file name
without extension
.dtm ).
Final results display only
Final results
Calculated results for the calculation formulae defined on the
"CALCULATION" dialog page (see section 5.6.4).
Quantity = formula value * Res.unit
Res.dev. display only
Result deviation
Deviation in the final results calculated using the error propagation
rules (see section 6.10).
If the quantity MC: is used in the calculation formula, the result
deviation Res.dev. is used to determine the range Result ±±
Res.dev. in which a final result may be expected with a probability of
68.3%.
The absolute error (in the same unit as the final result) and the relative
error (in %) are displayed.
Comments display only
Comments
Display of comments if any type of error or difficulties appeared in the
evaluation.
The following comments are possible:
see Evaluations The "RESULTS/Evaluation" page contains com-
ments on single results which must be heeded.
var. not found No result, as a variable is used in the formula for
which no value is available.
div. by zero No result, as division by 0 occurs in the formula.
range violat. No result as the admissible numeric range has
been violated in the formula calculation.
Admissible range:
-3.7e+33...-1.7e-33, 0, 1.7e-33...3.7e+33