Metrohm 746 VA Trace Analyzer - Manual (Page 199)

5.4 Storages
746 VA Trace Analyzer / 747 VA Stand
5-48
Softkeys Meaning
Delete
file(s)
Delete selected methods
The methods marked by an arrow –> (if no methods are marked, the
method selected with the cursor) are deleted after confirmation with y .
Secured methods ( * ) must first be unsecured with before
they can be modified.
Copy
to
Copy selected methods to selected destination
The methods marked by an arrow –> (if no methods are marked, the
method selected with the cursor) are copied to the selected destina-
tion. The following destinations are available:
Working
storage
Working storage (only the method selected with the cursor is copied;
the loaded method will be overwritten)
Method
storage
Method storage "METHODS" (a new name must be entered for the
copied method)
Data
card
Data card (an unsecured method with the same name will be over-
written)
RS232
Ifc.1
RS232 interface 1, i.e. the PC connected to it
RS232
Ifc.2
RS232 interface 2, i.e. the PC connected to it
Copy
from
Copy method from selected source
The method is copied from the selected source to the method list. The
following sources can be selected:
Working
storage
Working storage (an unsecured method with the same name will be
overwritten)
RS232
Ifc.1
RS232 interface 1, i.e. the PC connected to it
RS232
Ifc.2
RS232 interface 2, i.e. the PC connected to it
Unselect
file(s)
Cancel selection
The selection of the methods marked by an arrow –> is canceled.
Change
display
Change display type
Switching between the space-saving display mode with method
names in 4 columns and the display mode with name, contents and
memory size.
>> Switch to additional softkeys
Print
all
Print list of all methods
The "METHODS" page is printed out with all method entries.
Select
all
Select all methods
All methods on the page are selected and marked by an arrow –> .