Metrohm 746 VA Trace Analyzer - Manual (Page 235)

5.5 Operation
746 VA Trace Analyzer / 747 VA Stand
5-84
Method : XXXXXXXX RESULTS
Determ.: XXXXXXXX Evaluations
Substance : XXXXXXXX Comments
Mass conc.: XXXXXXXX XXXX Mass : XXXXX xg ДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДД
MC.dev. : XXXXXXXX XXXX (XXXX%) Add.mass : XXXXX xg XXXXXXXXXXXXXXXXXX
Cal.dev. : XXXXXXXX XXXX (XXXX%) V0.sample: XXXXX xL XXXXXXXXXXXXXXXXXX
VR U/mV I/xA I.mean Std.dev. I.delta Comments
ДДД ДДД ДДДДД ДДДДД ДДДДД ДДДДД ДДДДДД ДДДДДД ДДДДДДД ДДДДДДД ДДДДДДД ДДДДДДД ДДДДДДДДДДДДДДДДДД ДДДДДДДДДДДДДДДДДД
XX. XXXXX XXXXXX XXXXXX XXXXXX XXXXXXXXXXXXXXXXXX
XX. XXXXX XXXXXX
XX. XXXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXXXXXXXXXXXXXXXX
XX. XXXXX XXXXXX
XX. XXXXX XXXXXX XXXXXX XXXXXX XXXXXX XXXXXXXXXXXXXXXXXX
Select
subst.
Suspend/
activate
New
calcul.
>>
Calcul.
>>
Calibr.
Softkeys Meaning
Select
subst.
Select substance
The available substances can be selected using the softkeys carrying
the substance name and segment name:
Subst.#
Segment#
Selection of the substance Subst.# assigned to the segment
Segment# .
Suspend/
activate
Suspend/activate single measurements
The single measurement VR selected with the field cursor is sus-
pended for subsequent calculations (marking ! ) or reactivated (no
marking).
New
calcul.
Recalculation
The content and formula calculation from evaluation values of the
substances (EV values) is restarted (corresponds to the softkey
on the "MONITORING" page).
>>
Calcul.
Calculations
Switching to the subpage "Calculations" with an overview of the final
results.
>>
Calibr.
Calibrations
Switching to the subpage "Calibrations" with the results of the sub-
stance calibrations.
7
5
7
5
6