Metrohm 746 VA Trace Analyzer - Manual (Page 276)

5.6.2 SEGMENTS
746 VA Trace Analyzer / 747 VA Stand
5-125
Softkeys Meaning
Select
segment
Select segment
The existing segments and those still free can be selected with the
softkeys carrying the segment names or
----- :
Segment# Selection of the segment Segment# .
Delete
segment
Delete segment
The displayed segment is deleted after confirmation with y .
Plot
param.
Axis scaling
Possibility to display and modify the parameters for the axis scaling of
the segment curves (display/plot parameters of the segments).
Segment
name
Change segment name
Possibility to enter the segment name. Segment names already
defined with the instruction
SEGMENT on the "OPERATION
SEQUENCE" page are displayed on the softkeys and can be adopted
directly:
Segment# Adoption of the segment name Segment# .
Keys Meaning
ENTER
Program test
By pressing the key in the navigation mode the program
on this dialog page is tested:
• If no error is found, no action occurs.
• If errors are found, the appropriate error messages are displayed
in the error window (see section 7.3.2).
Parameter Range; Default value / Meaning
Method display only
Method name
Name of the method loaded in the working memory.
For the method name, all characters are allowed with the exception of
the character " . ".
SEGMENT 8 characters;
Segment name
Name of the displayed segment. To change this, the softkey
name> must be pressed.
For the segment name, no brackets "(" or ")" are allowed.
18