Metrohm 746 VA Trace Analyzer - Manual (Page 531)

7 Safety, Errors, Troubleshooting, Diagnosis, GLP
746 VA Trace Analyzer / 747 VA Stand
7-32
4 Start overall initialization
After the RAM test, you are asked whether or not you wish to perform a
global, overall initialization:
-> reset all memory and hardware setup to default: y/n ?
All data memories are cleared, all instrument parameters
are reset to their default value.
Possibility to switch to the Reset with deletion of the work-
ing storage (see above) or to abort the overall initialization
(answer all subsequent inquiries also with ).
5 Testing the beep
The functioning of the beep can be tested by pressing . Press to
continue.
-> test beep: y/n ? n
The instrument is now powered up and the ”MONITORING” page appears.