Metrohm 746 VA Trace Analyzer User Manual

Page 267

5.5 Operation

746 VA Trace Analyzer / 747 VA Stand

5-116

Cyclic Segment-VR-Curve: XXXXXXXX-XX-original

Select

segment

Start

zoom

Reset

zoom

Next

Prev.

Scale

Softkeys

Meaning

Select

segment

Select segment curves

The selection of segment and VR numbers determines what cyclic
curves are displayed. A cyclic segment curve always includes all of
the maximum 5 ramps which have the same VR number (the display
of individual ramps is not possible). First, the softkeys carrying the
segment names must be used to select the desired cyclic segment:

Segment#

Selection of the segment

Segment#

This is followed by entry of the numbers for variation

and replication

. For this, the system window shows the message:

VR max: ##

Maximum selectable VR values

Enter VR: [0*]

Entry of VR

The following possibilities are available for the entry of VR:

Entry of two numbers

for the display of a single cy-

clic curve with all ramps of the same measurement cy-
cle (measurement cycles = replications).

Entry of an asterisk

and a number

for the display

of all variations with the same replication (shown by

(grouped VR: *#)

in the title line).

Entry of a number

and an asterisk

for the display

of all cyclic curves of the same variation (shown by

(grouped VR: #*)

in the title line.

Entry of two asterisks

for the display of all cyclic

curves (shown by

(grouped VR: **)

in the title line).

Without entry of VR, the default value

is effective for variation 0

with all replications as standard.