Metrohm 746 VA Trace Analyzer - Manual (Page 253)

5.5 Operation
746 VA Trace Analyzer / 747 VA Stand
5-102
Parameter Range; Default value / Meaning
dU.rear display only
Voltage difference to rear base point
Absolute voltage difference determined between the base point at the
peak/wave rear half and the peak voltage
U.peak or the half-wave
potential U/2 in mV.
S.front display only
Slope of baseline at front base point
Slope of the baseline determined at the base point at the peak/wave
front half.
With peaks with a baseline of the linear type, this parameter is not
shown.
S.rear display only
Slope of baseline at rear base point
Slope of the baseline determined at the base point at the peak/wave
front half.
With peaks with a baseline of the linear type, this parameter is not
shown.
linear, whole
dU.frontdU.rear
S.rear S.front
S.rear
S.front
S.front
S.rear
linear, DCT
dU.frontdU.rear
expon., whole
dU.frontdU.rear
polynom, whole
dU.frontdU.rear