Metrohm 746 VA Trace Analyzer - Manual (Page 506)

7.3 Error messages
746 VA Trace Analyzer / 747 VA Stand
7-7
7.3.2 List of error messages
The following list contains all error messages in alphabetical order. You will find ex-
planations regarding how to proceed should the instrument need to be initialized
(reset or overall initialization) in section 7.3.3. The abbreviations in the ”Exit” column
have the following meaning:
Exit Meaning with ” Auto.batch = off ” Meaning with ” Auto.batch = on ”
E Exit with or any other key;
no program has been started. –
E/C Exit with or any other key;
a program already started continues. The error message is displayed for
10 s and is then acknowledged
automatically with ; the
started program continues to run.
E/S Exit with or any other key;
a program already started is stopped. The error message is displayed for
10 s and is then acknowledged
automatically with ; the
started program is stopped.
E/N Exit with or any other key;
a program already started is stopped. The error message is displayed for
10 s and is then acknowledged
automatically with ; the
started program is stopped. The next
determination is then started.
S The instrument is blocked, exit is no
longer possible; the instrument must
be reinitialized (see section 7.3.3). The instrument is blocked, exit is no
longer possible; the instrument must
be reinitialized (see section 7.3.3).
r/a Exit with (r = retry) or
(a = abort). The error message is displayed for
10 s and is then acknowledged
automatically with .
Esc Exit with (Escape);
for the acknowledgment of error
messages in the error window. –