Metrohm 746 VA Trace Analyzer - Manual (Page 395)

5.7 Program instructions
746 VA Trace Analyzer / 747 VA Stand
5-244
HOLD Page: O, S Stand: M, A Abbreviation: HO
Instructions t/s Main parameters Auxiliary parameters
––––––––––––– ––––– ––––––––––––––––––––––––– –––––––––––––––––––––––––
## .. HOLD ..... Message ................
Function Program hold with output of a message.
Parameter Range; Default value / Meaning
Message 16 characters; -
Message
The message put in here is displayed in the screen window MEAS.TASK
MESSAGE when the HOLD instruction is reached. The program is not
continued until this message has been confirmed with the
key.
Description The HOLD instruction is used to interrupt the program at a specific
location. The program is not continued until the message Message
displayed on the screen associated with HOLD has been confirmed with
the key.