Metrohm 746 VA Trace Analyzer - Manual (Page 327)

5.7 Program instructions
746 VA Trace Analyzer / 747 VA Stand
5-176
Program
instruction
An overview of the possible program instructions is given in
section 5.7.2. You will find the complete, alphabetical instruction
list and the possible abbreviations in the entry in section 5.7.3.
All instructions possible on the appropriate dialog page are
displayed in alphabetical order on the softkeys and can thus be
directly adopted. When the program instruction is entered, the
associated main and auxiliary parameters are inserted auto-
matically.
Line time Most instruction lines can be optionally provided with a wait
time. During the program run, this line time will be allowed to
elapse before the next instruction is executed. With SWEEP
instructions, the line time is calculated automatically and can
not be changed.
Main
parameters
The main parameters are inserted automatically on entry of the
program instruction. The parameters are provided with default
values, which can be changed.
Auxiliary
parameters
The auxiliary parameters are inserted automatically on entry of
the program instruction. The parameters are provided with
default values, which can be changed.